800.565.3317 websales@bhd.ca

Fluke 773 4-20mA Process Clamp Meter

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools
Specifications
Diameter of measurable conductor 0.177 or 4.5 mm max
Operating temperature -10 to 50 C
Storage temperature -25 to 60C
Operating humidity < 90% @ <30 C, < 75% @ 30 to 55C
Operating altitude 0 to 2000 m
IP rating IP 40
Size 44 x 70 x 246 mm (2 7/8 x 5 x 11 5/8 in)
Weight 410 g, (14.4 oz)
Vibration Random 2 g, 5 to 500 Hz
Shock 1 meter drop test (except the jaw)
EMI/RFI Meets EN61326-1
Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient 0.01% C
(<18? or > 28?)
Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
Warranty Three years for electronics
one year for cable and clamp assembly
Functional Specifications
mA measurement
(measured by clamp)
Resolution / Range 0 to 20.99 mA
Accuracy 0.2% + 2 counts
Resolution / Range 21.0mA to 100.0 mA
Accuracy 1% + 5 counts
mA measurement (measured in series with test jacks) Resolution / Range 0 to 24.00 mA
Accuracy 0.2% +2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / Range 0 to 24.00 mA
Accuracy 0.2% +2 counts
mA simulate (maximum voltage 50 V dc) Resolution / Range 0 to 24.00 mA
Accuracy 0.2% +2 counts
Voltage source (2 mA maximum drive current) Resolution / Range 0 to 10.00 V dc
Accuracy 0.2% + 2 counts
Voltage measure Resolution / Range 0 to 30.00 V dc
Accuracy 0.2% + 2 counts
Fluke 773 Process Clamp Meter Product Image
$1,781.00
In Stock