800.565.3317 websales@bhd.ca

Fluke 771 Process Clamp Meter

Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

 

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It's designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Specifications
Diameter of measurable conductor 0.177 or 4.5 mm max
Operating temperature -10 to 50 C
Storage temperature -25 to 60C
Operating humidity < 90% @ <30 C, < 75% @ 30 to 55C
Operating altitude 0 to 2000 m
IP rating IP 40
Size 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
Weight 260G, (9.1 oz.)
Vibration Random 2 g, 5 to 500 Hz
Shock 1 meter drop test (except the jaw)
EMI/RFI Meets EN61326-1
Note: For current measurement w/ JAW, add 1mA to
specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient 0.01% C
(<18? or > 28?)
Power, battery life (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
Warranty Three years for electronics one year for cable and clamp assembly
Functional Specifications
mA measurement
(measured by clamp)
Resolution / Range 0 to 20.99 mA
Accuracy 0.2% + 2 counts
Resolution / Range 21.0mA to 100.0 mA
Accuracy 1% + 5 counts
Fluke 771 Process Clamp Meter Product Image
$822.00
In Stock