800.565.3317 websales@bhd.ca

Fluke 1550C/KIT 5 kV Insulation Resistance Tester Kit

The new Fluke 1550C insulation resistance testers, offer digital insulation testing up to 5kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1550C is a perfect tool for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.

Insulation Resistance Measurement
Test voltage (dc) Range (dc) Accuracy (± reading)
250 V < 200 kΩ unspecified
200 kΩ to 5 GΩ 5 %
< 5 GΩ to 50 GΩ 20 %
> 50 GΩ unspecified
500 V 200 kΩ unspecified
200 kΩ to 10 GΩ 5 %
10 GΩ to 100 GΩ 20 %
> 100 GΩ unspecified
1000 V  < 200 kΩ unspecified
200 kΩ to 20 GΩ 5 %
20 GΩ to 200 GΩ 20 %
> 200 GΩ unspecified
2500 V  < 200 kΩ unspecified
200 kΩ to 50 GΩ 5 %
50 GΩ to 500 GΩ 20 %
> 500 GΩ unspecified
5000 V < 200 kΩ unspecified
200 kΩ to 100 GΩ 5 %
100 GΩ to 1 TΩ 20 %
> 1 TΩ unspecified
Bar graph range 0 to 1 TΩ 
Insulation test voltage accuracy -0 %, +10 % at 1 mA load current
Induced ac mains current rejection 2 mA maximum
Charging rate for capacitive load 5 seconds per μF 
Discharge rate for capacitive load 1.5 s/μF
Leakage current measurement Range: 1 nA to 2 mA Accuracy: ± (5 % + 2 nA)
Capacitance measurement Range: 0.01 uF to 15.00 μF Accuracy: ± (15 % rdg + 0.03 μF)
Timer Range: 0 to 99 minutes Resolution Accuracy:
Setting: 1 minute
Indication: 1 second
Live circuit warning Warning Range:
30 V to 660 V ac/dc,
50/60 Hz
Voltage Accuracy:
± (15 % + 2 V)
General Specifications
Display 75 mm x 105 mm
Power 12 V lead-acid rechargeable battery, Yuasa NP2.8-12
Charger input (AC) Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA
This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only.
Dimensions 170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in)
Weight 3.6 kg (7.94 lb)
Temperature (operating) -20 ºC to 50 ºC (-4 ºF to 122 ºF)
Temperature (storage) -20 ºC to 65 ºC (-4 ºF to 149 ºF)
Humidity 80 % to 31 ºC decreasing linearly to 50 % at 50 ºC
Altitude 2000 m
Enclosure sealing IP40
Input overload protection 1000 V ac
Electromagnetic compatibility EN 61326
Safety compliance CAT III 1000 V, CAT IV 600 V
Pollution degree 2
Fluke 1550c Insulation Resistance Tester Product Image
$7,123.00
In Stock